Specialty Chemicals/Other
Delay Option Filtering
Filter Products
New Sensor Monitoring Cards
The cards you have depended on for years have drastically improved. The new Sensor glue will not stick to your hands. The trap is as dependable as ever with added benefits: Biodegradable - there is no plastic to dispose of 1" grid is printed on each card to help you determine the magnitude of your infestation. Repacked - The Sensor cards are now packaged in re-sealable bags for easier opening and storage.
The cards you have depended on for years have drastically improved. The new Sensor glue will not stick to your hands. The trap is as dependable as ever with added benefits: Biodegradable - there is no plastic to dispose of 1" grid is printed on each card to help you determine the magnitude of your infestation. Repacked - The Sensor cards are now packaged in re-sealable bags for easier opening and storage.
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Easy to read color change makes it easy to adjust spray water to the optimum pH for maximum pesticide performance. Prevents alkaline hydrolysis, neutralizes dissolved salts, and adds a surfactant to improve spreading of the spray material while reducing visible residue. Optimum spray water pH varies by product. Request a copy of the bulletin "Directions for Optimum Spray Water pH".
Easy to read color change makes it easy to adjust spray water to the optimum pH for maximum pesticide performance. Prevents alkaline hydrolysis, neutralizes dissolved salts, and adds a surfactant to improve spreading of the spray material while reducing visible residue. Optimum spray water pH varies by product. Request a copy of the bulletin "Directions for Optimum Spray Water pH".
Dissolve IBA salts in water to make solution for foliar or basal applications to enhance rooting. May be applied to herbaceous or woody cuttings. Rates vary and are determined by use pattern, please consult the label.
REI = 0
REI = 0
These cards will trap the adult stages of flying insects. BioWorks' unique 2-sided (yellow/blue) design allows you to trap a wider variety of the most common plant-damaging insects (yellow for aphids, whitefly, fungus gnats, etc. and blue for thrips).
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Added to irrigation water to neutralize excess alkalinity and/or reduce soil pH. Contact GGSPro for rates and precautions.
Added to irrigation water to neutralize excess alkalinity and/or reduce soil pH. Contact GGSPro for rates and precautions.
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many waterborne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level.
*OMRI Listed
This powerful sanitizing agent controls algae and many waterborne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level.
*OMRI Listed
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many waterborne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level.
*OMRI Listed
This powerful sanitizing agent controls algae and many waterborne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level.
*OMRI Listed
Active Ingredient: Yucca schidigera
Non-ionic, organic wetting agent for use with media. Organics Ag Aide composed of 100% extract will improve wetting in both soilbased and soilless media.
Drench rates: Initial, one-time application at 16 oz per 100 gal. Weekly pulse at 1-1.5 oz per 100 gal.
May also be used as a foliar spreader with most pesticides.
Surfactant spray rates: 1/4-1 tsp per gal or 4-16 oz per 100 gal.
*OMRI Listed
Non-ionic, organic wetting agent for use with media. Organics Ag Aide composed of 100% extract will improve wetting in both soilbased and soilless media.
Drench rates: Initial, one-time application at 16 oz per 100 gal. Weekly pulse at 1-1.5 oz per 100 gal.
May also be used as a foliar spreader with most pesticides.
Surfactant spray rates: 1/4-1 tsp per gal or 4-16 oz per 100 gal.
*OMRI Listed
Active Ingredient: Poly-1-p-Menthene
Nu-Film P is a spreader-sticker agent designed for use with most pesticides. It forms a sticky, elastic film holding pesticides on crop foliage.
Rate: 1/4-1/3 tsp per gal or 4-6 oz per 100 gal.
*OMRI listed
Nu-Film P is a spreader-sticker agent designed for use with most pesticides. It forms a sticky, elastic film holding pesticides on crop foliage.
Rate: 1/4-1/3 tsp per gal or 4-6 oz per 100 gal.
*OMRI listed
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
Active Ingredient: Paraffin, Oxidized Polyethylene, Ethoxylated Nonylphenol, Potassium Hydroxide
Locks moisture in the leaves and increases plant survival during transplanting and transporting, and protects against winter/summer desiccation. A wax emulsion that reduces moisture loss.
Rates:
Winter protection-1 part Leafshield to 15 parts water
Transplant/transport protection-1 part Leafshield to 30 parts water
Locks moisture in the leaves and increases plant survival during transplanting and transporting, and protects against winter/summer desiccation. A wax emulsion that reduces moisture loss.
Rates:
Winter protection-1 part Leafshield to 15 parts water
Transplant/transport protection-1 part Leafshield to 30 parts water
Active Ingredient: Polydimethylsiloxane
Tripleline is formulated to prevent excessive foaming that can occur in spray tanks with certain pesticides. It can also be used as a defoaming agent if foaming has already occurred. Rates range from 1/2-2 oz per 100 gal depending on the foaming characteristics of the pesticides being used. In rare cases, higher rates may be required, but rates should never exceed 5% of the spray volume. Always test for compatibility when making new combinations.
Tripleline is formulated to prevent excessive foaming that can occur in spray tanks with certain pesticides. It can also be used as a defoaming agent if foaming has already occurred. Rates range from 1/2-2 oz per 100 gal depending on the foaming characteristics of the pesticides being used. In rare cases, higher rates may be required, but rates should never exceed 5% of the spray volume. Always test for compatibility when making new combinations.
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
A powerful combination of cleaning and wetting agents that effectively remove whitewash coatings, algae, dirt, calcium and other hard water deposits. STRIP-IT Pro's intensified scrubbing action will dislodge compacted organic debris and mineral deposits for easy removal with a high pressure hose. Do not allow STRIP-IT Pro to dry or surface etching may result. STRIP-IT Pro can be safely used on aluminium, copper, galvanized steel, glass, plastics, fiberglass and concrete and will not harm the greenhouse structure or horticultural equipment.
Rates: 4-13 oz STRIP-IT Pro per gal water.
A powerful combination of cleaning and wetting agents that effectively remove whitewash coatings, algae, dirt, calcium and other hard water deposits. STRIP-IT Pro's intensified scrubbing action will dislodge compacted organic debris and mineral deposits for easy removal with a high pressure hose. Do not allow STRIP-IT Pro to dry or surface etching may result. STRIP-IT Pro can be safely used on aluminium, copper, galvanized steel, glass, plastics, fiberglass and concrete and will not harm the greenhouse structure or horticultural equipment.
Rates: 4-13 oz STRIP-IT Pro per gal water.
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
A powerful combination of cleaning and wetting agents that effectively remove whitewash coatings, algae, dirt, calcium and other hard water deposits. STRIP-IT Pro's intensified scrubbing action will dislodge compacted organic debris and mineral deposits for easy removal with a high pressure hose. Do not allow STRIP-IT Pro to dry or surface etching may result. STRIP-IT Pro can be safely used on aluminium, copper, galvanized steel, glass, plastics, fiberglass and concrete and will not harm the greenhouse structure or horticultural equipment. Rates: 4-13 oz STRIP-IT Pro per gal water.
A powerful combination of cleaning and wetting agents that effectively remove whitewash coatings, algae, dirt, calcium and other hard water deposits. STRIP-IT Pro's intensified scrubbing action will dislodge compacted organic debris and mineral deposits for easy removal with a high pressure hose. Do not allow STRIP-IT Pro to dry or surface etching may result. STRIP-IT Pro can be safely used on aluminium, copper, galvanized steel, glass, plastics, fiberglass and concrete and will not harm the greenhouse structure or horticultural equipment. Rates: 4-13 oz STRIP-IT Pro per gal water.
Active Ingredient: Hydrogen dioxide & Peracetic acid
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
This powerful sanitizing agent controls algae and many water-borne pathogens in irrigation water and on many hard surfaces. Labeled for use in all types of irrigation systems, industrial, and commercial water systems, and evaporative coolers. Helps add dissolved oxygen to the water and does not off-gas. Effective at any pH level. Label includes instructions for fruit and vegetable wash.
*OMRI listed
EthylBloc Technology is an EPA approved ethylene action inhibitor. It inhibits the negative effects of ethylene which include: premature wilting, leaf yellowing, premature opening, and premature death. EthylBloc is a registered trademark of the Dow AgroSciences Company and is not for use on food or food crops.
EthylBloc Technology is an EPA approved ethylene action inhibitor. It inhibits the negative effects of ethylene which include: premature wilting, leaf yellowing, premature opening, and premature death. EthylBloc is a registered trademark of the Dow AgroSciences Company and is not for use on food or food crops.
EthylBloc Technology is an EPA approved ethylene action inhibitor. It inhibits the negative effects of ethylene which include: premature wilting, leaf yellowing, premature opening, and premature death. EthylBloc is a registered trademark of the Dow AgroSciences Company and is not for use on food or food crops.
SaniDate 5.0 is a broad-spectrum sanitizer and disinfectant for greenhouse use. The peroxycompound chemistry is a powerful, organic solution that controls human-health pathogens, as well as plant pathogens. SaniDate 5.0 can be applied to greenhouse hard surfaces, including food contact areas.
SaniDate 5.0 can also be used to disinfect irrigation lines. Controlling biofilm, algae and bacteria, SaniDate 5.0 kills water borne pathogens without being pH dependent or clogging emitters.
*OMRI listed
SaniDate 5.0 can also be used to disinfect irrigation lines. Controlling biofilm, algae and bacteria, SaniDate 5.0 kills water borne pathogens without being pH dependent or clogging emitters.
*OMRI listed
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Didecyl dimethyl ammonium chloride
Kleengrow is a 4th generation DDAC fungicide, algaecide, and virucide for use on greenhouse ornamentals and cut flowers from propagation to finish. Use as a foliar spray, drip or drench to control diseases such as: Botrytis, powdery and downy mildew and bacterial leaf spots. Use as a soil drench or injected into irrigation systems to control water borne pathogens and root rots such as: Pythium, Phytophthora, Fusarium, Rhizoctonia and Thielaviopsis.
Spray or Drench application over crops: 0.06-0.38 oz per gal or 6-38 o z per 100 gal -- REI = 48 hours
Intermittent chemigation: 0.03-0.20 oz per gal or 3-20 oz per 100 gal -- REI = 12 hours
Continuous chemigation: 0.003-0.014 oz per gal or 0.3-1.4 oz per 100 gal -- REI = 0
Propagation dips: 0.06-0.50 oz per gal or 6-50 oz per 100 gal -- REI = 0
Active Ingredient: Didecyl dimethyl ammonium chloride
Kleengrow is a 4th generation DDAC fungicide, algaecide, and virucide for use on greenhouse ornamentals and cut flowers from propagation to finish. Use as a foliar spray, drip or drench to control diseases such as: Botrytis, powdery and downy mildew and bacterial leaf spots. Use as a soil drench or injected into irrigation systems to control water borne pathogens and root rots such as: Pythium, Phytophthora, Fusarium, Rhizoctonia and Thielaviopsis.
Spray or Drench application over crops: 0.06-0.38 oz per gal or 6-38 o z per 100 gal -- REI = 48 hours
Intermittent chemigation: 0.03-0.20 oz per gal or 3-20 oz per 100 gal -- REI = 12 hours
Continuous chemigation: 0.003-0.014 oz per gal or 0.3-1.4 oz per 100 gal -- REI = 0
Propagation dips: 0.06-0.50 oz per gal or 6-50 oz per 100 gal -- REI = 0
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Didecyl dimethyl ammonium chloride
A uniquely blended, advanced generation quaternary ammonium compound for controlling algae, fungal and bacterial pathogens on ornamentals, cut flowers and nursery stock in greenhouses. Foliar sprays control Botrytis, downy mildew, certain bacterial leaf spots and others. Soil drenches control Pythium, Phytophthora, Rhizoctonia and Thielaviopsis.
Foliar sprays rates: 1/3-1 1/2 tsp per gal or 6-25 oz per 100 gal.
Drench rates: 12.5-50 oz per 100 gal.
Best used preventively. REI is 0 hrs for hard surface treatments.
MOA = NC
REI = 48
Active Ingredient: Didecyl dimethyl ammonium chloride
A uniquely blended, advanced generation quaternary ammonium compound for controlling algae, fungal and bacterial pathogens on ornamentals, cut flowers and nursery stock in greenhouses. Foliar sprays control Botrytis, downy mildew, certain bacterial leaf spots and others. Soil drenches control Pythium, Phytophthora, Rhizoctonia and Thielaviopsis.
Foliar sprays rates: 1/3-1 1/2 tsp per gal or 6-25 oz per 100 gal.
Drench rates: 12.5-50 oz per 100 gal.
Best used preventively. REI is 0 hrs for hard surface treatments.
MOA = NC
REI = 48
Active Ingredient: Indole-3-butyric acid & 1-Napthaleneacetic acid
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
Active Ingredient: Diphacinone
For use in wet and dry areas. Specially formulated with a blend of favorite foods and grains of rats and mice. Mold and moisture resistant and stays palatable to rodents.
For use in wet and dry areas. Specially formulated with a blend of favorite foods and grains of rats and mice. Mold and moisture resistant and stays palatable to rodents.
Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water.
Active Ingredient: Indole-3-butyric acid & 1-Napthaleneacetic acid
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Indole-3-butyric acid & 1-Napthaleneacetic acid
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
Active Ingredient: Indole-3-butyric acid & 1-Napthaleneacetic acid
Liquid rooting agent. A liquid concentrate that is diluted with water to any desired strength. Dip `N Grow's liquid form allows it to be absorbed more easily by cuttings and ensures that a precise amount of chemical comes in contact with the stem. Contains Indole 3- butyric acid and naphthaleneacetic acid. Users should test on soft wood cuttings for compatibility.
Rate: Use a 1/20 ratio with a 5 second dip for most herbaceous cuttings. The label contains information to aid in choosing the correct dilution.
REI = 24
For Maintenance of Irrigation Systems
Eco-Clean is a biocatalyst whose advanced technology maintains drip and sprinkler irrigation systems free of deposits. Systems that are already fouled should be cleaned with an appropriate shock treatment before the constant injection of Eco-Clean begins.
*Great for cleaning drip irrigation and lines
*Vegetable based liquid concentrate
*Non-toxic and non-hazardous
*Environmentally safe
Eco-Clean is a biocatalyst whose advanced technology maintains drip and sprinkler irrigation systems free of deposits. Systems that are already fouled should be cleaned with an appropriate shock treatment before the constant injection of Eco-Clean begins.
*Great for cleaning drip irrigation and lines
*Vegetable based liquid concentrate
*Non-toxic and non-hazardous
*Environmentally safe
Hydrogen peroxide test strips. PAA levels can be determined by the use of a conversion table provided by BioSafe, available through GGSPro.
9000-Strip H2O2 ppm range: 0-3-10-30-100 Measure final dilution in hydroponics, etc.
9000-Strip H2O2 ppm range: 0-3-10-30-100 Measure final dilution in hydroponics, etc.
The BioMat is a durable foot/boot pad that controls plant and human health pathogens at facility entryways. The BioMat holds 2.5 gallons of solution and measures 33"x 23"x 1". As workers enter the facility the BioMat's sanitizing solution cleans the soles of shoes/boots, keeping contamination out of your facility. Refresh daily or as sanitary conditions dictate.
*Promotes biosecurity
*Economical
*Place at entry and exit points to reduce microbial contamination
*Promotes biosecurity
*Economical
*Place at entry and exit points to reduce microbial contamination
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Activted carbon
Brandt Pesticide Equipment Cleaner will remove and deactivate residual pesticide contamination from storage tanks and spray equipment. Use before changing from one pesticide to another or before storing equipment.
Rates range from 0.5-1.5 oz per gallon. See label for specific instructions.
Active Ingredient: Activted carbon
Brandt Pesticide Equipment Cleaner will remove and deactivate residual pesticide contamination from storage tanks and spray equipment. Use before changing from one pesticide to another or before storing equipment.
Rates range from 0.5-1.5 oz per gallon. See label for specific instructions.
Hydrogen peroxide test strips. PAA levels can be determined by the use of a conversion table provided by BioSafe, available through GGSPro.
9000-Strip-1000 H2O2 ppm range 0-50-150-300-500-800-1000 Measure stock tank concentration.
9000-Strip-1000 H2O2 ppm range 0-50-150-300-500-800-1000 Measure stock tank concentration.
Active Ingredient: Diphacinone
For use in wet and dry areas. Specially formulated with a blend of favorite foods and grains of rats and mice. Mold and moisture resistant and stays palatable to rodents.
For use in wet and dry areas. Specially formulated with a blend of favorite foods and grains of rats and mice. Mold and moisture resistant and stays palatable to rodents.
For Maintenance of Irrigation Systems
Eco-Clean is a biocatalyst whose advanced technology maintains drip and sprinkler irrigation systems free of deposits. Systems that are already fouled should be cleaned with an appropriate shock treatment before the constant injection of Eco-Clean begins.
*Great for cleaning drip irrigation and lines
*Vegetable based liquid concentrate
*Non-toxic and non-hazardous
*Environmentally safe
Eco-Clean is a biocatalyst whose advanced technology maintains drip and sprinkler irrigation systems free of deposits. Systems that are already fouled should be cleaned with an appropriate shock treatment before the constant injection of Eco-Clean begins.
*Great for cleaning drip irrigation and lines
*Vegetable based liquid concentrate
*Non-toxic and non-hazardous
*Environmentally safe
Active Ingredient: Silver Nitrate
Alesco is a unique post-harvest product to protect ethylene sensitive crops during shipping and retail display. Ethylene damage can be caused by transportation stress, dark storage, temperature fluctuations and external sources such as forklifts. This product is applied as a foliar spray to blooming plants that cover most of the growing area, ideally 1-2 days before shipping. Alesco remains effective for up to 3 weeks after treatment depending on the variety and environmental conditions. Benefits include: reducing flower petal shatter, bud abortion, leaf yellowing while extending flower longevity. A partial list of ethylene sensitive crops that benefit from an application of Alesco include: campanula, dahlia, dianthus, hibiscus, impatiens, lobelia, pansy, Pelargonium (geranium), petunia, rose, schlumbergera, and viola.
Foliar spray rates: 3/4 teas per gal or 12.8 oz per 100 gal. (1 container in 50 gal of water treats approximately 1 acre)
Alesco is a unique post-harvest product to protect ethylene sensitive crops during shipping and retail display. Ethylene damage can be caused by transportation stress, dark storage, temperature fluctuations and external sources such as forklifts. This product is applied as a foliar spray to blooming plants that cover most of the growing area, ideally 1-2 days before shipping. Alesco remains effective for up to 3 weeks after treatment depending on the variety and environmental conditions. Benefits include: reducing flower petal shatter, bud abortion, leaf yellowing while extending flower longevity. A partial list of ethylene sensitive crops that benefit from an application of Alesco include: campanula, dahlia, dianthus, hibiscus, impatiens, lobelia, pansy, Pelargonium (geranium), petunia, rose, schlumbergera, and viola.
Foliar spray rates: 3/4 teas per gal or 12.8 oz per 100 gal. (1 container in 50 gal of water treats approximately 1 acre)
Hormone powder for rooting cuttings available in three strengths. Active ingredient is Indole -3 - Butyric Acid.
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Didecyl dimethyl ammonium chloride
Kleengrow is a 4th generation DDAC fungicide, algaecide, and virucide for use on greenhouse ornamentals and cut flowers from propagation to finish. Use as a foliar spray, drip or drench to control diseases such as: Botrytis, powdery and downy mildew and bacterial leaf spots. Use as a soil drench or injected into irrigation systems to control water borne pathogens and root rots such as: Pythium, Phytophthora, Fusarium, Rhizoctonia and Thielaviopsis.
Spray or Drench application over crops: 0.06-0.38 oz per gal or 6-38 oz per 100 gal -- REI = 48 hours
Intermittent chemigation: 0.03-0.20 oz per gal or 3-20 oz per 100 gal -- REI = 12 hours
Continuous chemigation: 0.003-0.014 oz per gal or 0.3-1.4 oz per 100 gal -- REI = 0
Propagation dips: 0.06-0.50 oz per gal or 6-50 oz per 100 gal -- REI = 0
Active Ingredient: Didecyl dimethyl ammonium chloride
Kleengrow is a 4th generation DDAC fungicide, algaecide, and virucide for use on greenhouse ornamentals and cut flowers from propagation to finish. Use as a foliar spray, drip or drench to control diseases such as: Botrytis, powdery and downy mildew and bacterial leaf spots. Use as a soil drench or injected into irrigation systems to control water borne pathogens and root rots such as: Pythium, Phytophthora, Fusarium, Rhizoctonia and Thielaviopsis.
Spray or Drench application over crops: 0.06-0.38 oz per gal or 6-38 oz per 100 gal -- REI = 48 hours
Intermittent chemigation: 0.03-0.20 oz per gal or 3-20 oz per 100 gal -- REI = 12 hours
Continuous chemigation: 0.003-0.014 oz per gal or 0.3-1.4 oz per 100 gal -- REI = 0
Propagation dips: 0.06-0.50 oz per gal or 6-50 oz per 100 gal -- REI = 0
Water Analysis Leads You to the Best Formulation
Water quality is the single most important factor in determining solubility and nutrient availability. That's why ICL Specialty Fertilizers is dedicated to providing accurate, affordable analysis through The ICL Specialty Fertilizers Testing Lab. The Lab provides easy-tounderstand reports that will enable you to match the best Peters formulations to your water's characteristics. Mapping more than two decades worth of water analyses provides an approximation of water quality across the country. However, it also reaffirms that water quality can vary greatly-even within a single county. Accurate testing is the only way to know exactly what your plants are getting from your water. Test results will indicate your ABC Water Type (1-4)TM that can be matched with a similar indicator which appears on the front of each bag of Peters Water Soluble Fertilizer.
Selecting a fertilizer based on this water type will ensure you experience the best results from your fertilizer program. Additionally ICL Specialty Fertilizers backs up the lab service with the support of experienced, local Territory Managers who can consult with you to further refine your fertilizer programs.
Please contact Griffin for more information.
Water quality is the single most important factor in determining solubility and nutrient availability. That's why ICL Specialty Fertilizers is dedicated to providing accurate, affordable analysis through The ICL Specialty Fertilizers Testing Lab. The Lab provides easy-tounderstand reports that will enable you to match the best Peters formulations to your water's characteristics. Mapping more than two decades worth of water analyses provides an approximation of water quality across the country. However, it also reaffirms that water quality can vary greatly-even within a single county. Accurate testing is the only way to know exactly what your plants are getting from your water. Test results will indicate your ABC Water Type (1-4)TM that can be matched with a similar indicator which appears on the front of each bag of Peters Water Soluble Fertilizer.
Selecting a fertilizer based on this water type will ensure you experience the best results from your fertilizer program. Additionally ICL Specialty Fertilizers backs up the lab service with the support of experienced, local Territory Managers who can consult with you to further refine your fertilizer programs.
Please contact Griffin for more information.
Tissue Analysis - Always run a tissue analysis in conjunction with the media analysis to get the full nutritional picture. This analysis will provide information on the plant's internal nutritional status.
Media Analysis Kit - The major emphasis of any plant nutritional analysis program should be on media and plant tissue. This information combined with the water and fertilizer solution analysis will provide a sound basis for judging the nutritional status
Dissolve IBA salts in water to make solution for foliar or basal applications to enhance rooting. May be applied to herbaceous or woody cuttings. Rates vary and are determined by use pattern, please consult the label.
REI = 0
REI = 0
Hormone powder for rooting cuttings available in three strengths. Active ingredient is Indole -3 - Butyric Acid.
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
Hormone powder for rooting cuttings available in three strengths. Active ingredient is Indole -3 - Butyric Acid.
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
#1 (.1% IBA) for greenhouse crops
#2 (.3% IBA) for semi-woody ornamentals
#3 (.8% IBA) for evergreen trees and shrubs
REI = 0
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Active Ingredient: Sodium Carbonate Peroxyhydrate
A broad spectrum granular algaecide/fungicide. Kills algae on contact with its powerful oxidation reaction and is labeled for use in lakes, ponds, and large bodies of water, as well as on non-painted surfaces like benches and walkways. Irrigation water can be used without interruption after treatment. NSF/ANSI Standard 60 certified for drinking water.
*Restricted use in CT & NY
*OMRI listed
REI = 1
Active Ingredient: Sodium Carbonate Peroxyhydrate
A broad spectrum granular algaecide/fungicide. Kills algae on contact with its powerful oxidation reaction and is labeled for use in lakes, ponds, and large bodies of water, as well as on non-painted surfaces like benches and walkways. Irrigation water can be used without interruption after treatment. NSF/ANSI Standard 60 certified for drinking water.
*Restricted use in CT & NY
*OMRI listed
REI = 1
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
**This product CANNOT ship via UPS/Fedex. Please request another mode of shipping.
Strip-It Cleaner is an end-of-season cleaner for greenhouse structures and irrigation systems / water storage tanks and sunblock wash.
*This product is recommended for end-of-season cleaning of structures / irrigation lines/tanks and whitewash removal to create a healthy, sanitary environment for new crops being established.
*This product is a specifically formulated combination of sulfuric acid and wetting agents that effectively and safely remove whitewash coatings, organic sludge, heat-set grease / oil / dirt, calcium and other hard water deposits.
Strip-It Cleaner is an end-of-season cleaner for greenhouse structures and irrigation systems / water storage tanks and sunblock wash.
*This product is recommended for end-of-season cleaning of structures / irrigation lines/tanks and whitewash removal to create a healthy, sanitary environment for new crops being established.
*This product is a specifically formulated combination of sulfuric acid and wetting agents that effectively and safely remove whitewash coatings, organic sludge, heat-set grease / oil / dirt, calcium and other hard water deposits.